Home About
Services All 43 services Shingle Shingle Roofing Architectural Shingle Roofing Designer Shingle Roofing Class 3 Impact Resistant Class 4 Impact Resistant Metal Metal Roofing Installation Metal Roofing Repair Metal Roofing Replacement Flat Flat Roof Installation Flat Roof Replacement Flat Roof Repair TPO Roof Installation TPO Roof Repair TPO Roof Replacement Storm Storm Damage Repair Hail Damage Repair Wind Damage Repair Roof Insurance Claims Commercial Commercial Roofing Commercial Flat Roofs Commercial Roof Leaks Commercial Roof Inspections Warehouse Roofing Industrial Roofing Multi-Family Roofing Townhome Roof Repair Church Roofing Restaurant Roofing Siding Siding Installation Siding Repair Vinyl Siding Installation Vinyl Siding Repair Wood Siding Installation Wood Siding Repair Gutters Gutter Installation Gutter Repair Fascia Installation Fascia Repair Soffit Installation Soffit Repair Exterior Exterior Painting Fence Installation Fence Repair
Areas Service Areas
Shelby County, TN All of Shelby County, TN Memphis, TN
Memphis services Storm Damage Repair Class 4 Impact Resistant Architectural Shingle Roofing Roof Insurance Claims Soffit Installation
Collierville, TN
Collierville services Shingle Roofing Wind Damage Repair Flat Roof Repair Gutter Installation Fascia Repair
Bartlett, TN
Bartlett services Class 3 Impact Resistant Hail Damage Repair Townhome Roof Repair Gutter Repair Soffit Repair
Lakeland, TN
Lakeland services Flat Roof Installation Flat Roof Replacement Fascia Installation Wood Siding Repair Exterior Painting
Arlington, TN Millington, TN Cordova, TN Eads, TN Ellendale, TN Brunswick, TN Capleville, TN Hickory Hill, TN Raleigh, TN Frayser, TN East Memphis, TN Southwind, TN Forest Hill, TN Riverdale, TN
Fayette County, TN All of Fayette County, TN Piperton, TN Oakland, TN Hickory Withe, TN
DeSoto County, MS All of DeSoto County, MS Southaven, MS Olive Branch, MS Horn Lake, MS Hernando, MS Nesbit, MS
Tipton County, TN All of Tipton County, TN Atoka, TN Brighton, TN Munford, TN Covington, TN Tipton, TN
Crittenden County, AR All of Crittenden County, AR West Memphis, AR Marion, AR
Gallery Blog Careers Contact
Call · (901) 922-9450
Skip to content

Why the Fascia Comes First When New Gutters Are Going Up

November 2026

Fascia is the board along the edge of the roof that the gutter hangs on. It is easy to forget until the gutters or the roof are being replaced, and then it decides how well both of them hold up. On a Lakeland house hitting its first replacement cycle, that edge deserves a decision of its own.

Clean fascia and trim on a brick home in Memphis, Tennessee
Clean white fascia and trim along a red brick gable with an arched window, bare winter branches against a blue sky

What the board actually does

Fascia closes off the ends of the rafters and gives the roof a finished edge. It carries the drip edge at the top, holds the soffit along the bottom, and takes every screw or hanger that keeps the gutter up.

That makes it a working part of the roof, even though it reads as trim from the street.

A gutter full of water after a hard storm hangs real weight on that board, and the fasteners are only as strong as the wood they are driven into.

When fascia gets wet often, it softens from the back and along the bottom edge first, where nobody looks. The paint on the face can look fine while the wood behind it has gone spongy.

So a new gutter run and the board behind it belong in the same conversation. One cannot outlast the other by much, and the weaker of the two sets the pace.

All Done Roofing owner with a homeowner in Memphis, Tennessee

Why the order matters

A reroof changes the edge of the roof. New drip edge goes on, the first course of shingles sets the line where water will leave, and the gutter has to sit right under that line to catch it.

If the fascia is going to be replaced, that has to happen before the drip edge and the gutter go on.

Pulling a new gutter down later to swap a board means disturbing a finished roof edge and doing the same labor twice.

The same goes for a gutter-only job. Hanging a new seamless run on an old board that is already soft at the corners puts new metal on a part that is close to done.

So the decision gets made up front. Jonathan checks the full length of the fascia on the free roof look and tells you which runs are sound and which should be replaced while everything is open.

Picking a material in plain terms

Primed wood is the traditional choice. It matches the trim on many houses, takes paint well and can be cut to fit any detail, but it needs paint kept up on every face to stay dry.

PVC or composite board does not rot and holds paint differently.

It moves more with heat than wood does, so it needs the right fasteners and room at the joints to keep from buckling.

Aluminum wrap is bent coil metal that covers a wood board and takes repainting off your list. It works well over sound wood, and it hides trouble over wood that is already soft, so the board under it has to be checked first.

None of these is right for every house. The trim already on the home, how much shade the edge sits in and how much upkeep you want to take on all point toward one or another.

What gets checked while the edge is open

With the old fascia off, the ends of the rafters are exposed. They get looked at and probed, because a soft rafter tail is the one thing a new board cannot fix by covering it.

The new fascia then has something solid to fasten to along its whole length.

A rafter tail with damage gets cut back to good wood and a new piece fastened alongside it.

The soffit along the bottom edge gets checked too, along with any vents in it. If the attic depends on that soffit for intake air, the vents stay open and clear once the new board is on.

Then the drip edge goes on over the new fascia so water drops into the gutter instead of running behind it. You get photos of the rafter ends and the bare edge before the trim covers them.

Questions to ask before the gutter goes up

Ask whether the fascia will be checked along the whole run, or only at the spots that look bad from the ground.

Ask what material the new board is, how it is fastened, and whether drip edge goes on over it as part of the job.

Ask who hangs the gutter. With All Done, the same crew handles the fascia, the drip edge and the gutter, so the board and the metal are fitted to each other by the people who put up both.

The page that goes with this

If your gutters or your roof are due and the fascia behind them needs replacing, the work is laid out on our fascia installation page for Lakeland.

Questions we get asked

Do gutter guards change what the fascia has to hold?

They add some weight and they hold leaves on top of the gutter instead of inside it, so the board still has to be sound. Guards also make the edge harder to see, which is one more reason to settle the fascia before they go on rather than find a soft spot under them later.

Is aluminum wrap enough on its own?

Only over sound wood. Wrap keeps paint off the board and sheds water, but it does nothing for a board that is already soft, and it hides that board from view. Any rotted section gets replaced first, then the wrap goes on over solid fascia so the whole edge starts out sound.

Are hidden hangers better than spikes through the gutter?

For most houses, yes. Hidden hangers screw into the fascia behind the gutter and hold it at the right pitch without a nail working loose over time. Long spikes through the face tend to back out as the wood around them softens. Either way, the fastener is only as good as the board.

Does PVC fascia need anything special in summer heat?

It grows and shrinks more than wood as the temperature swings, so it needs the fasteners its maker calls for and small gaps at the joints. Butted tight on a cool morning, it can bow by a hot afternoon. Set right, it stays straight and holds paint well.

Can soffit vents stay where they are with new fascia?

Usually, yes. The new board goes on at the outer edge and the soffit vents sit under the overhang, so they keep working as long as nothing blocks them. If a vent strip is cracked or painted shut, it is easy to replace while the edge is already open.

What to take from this

Fascia carries the drip edge, the soffit and the weight of every gutter.

Decide about the fascia before a reroof or a new gutter run, not after.

Primed wood, PVC or composite, and aluminum wrap each suit different houses and upkeep habits.

Rafter tails get checked while the edge is open.

Get it handled

Jonathan Stephenson answers the phone himself, walks the roof, and gives you a written number. Serving Germantown, TN and the Memphis metro.

Get It Handled(901) 922-9450