Home About
Services All 43 services Shingle Shingle Roofing Architectural Shingle Roofing Designer Shingle Roofing Class 3 Impact Resistant Class 4 Impact Resistant Metal Metal Roofing Installation Metal Roofing Repair Metal Roofing Replacement Flat Flat Roof Installation Flat Roof Replacement Flat Roof Repair TPO Roof Installation TPO Roof Repair TPO Roof Replacement Storm Storm Damage Repair Hail Damage Repair Wind Damage Repair Roof Insurance Claims Commercial Commercial Roofing Commercial Flat Roofs Commercial Roof Leaks Commercial Roof Inspections Warehouse Roofing Industrial Roofing Multi-Family Roofing Townhome Roof Repair Church Roofing Restaurant Roofing Siding Siding Installation Siding Repair Vinyl Siding Installation Vinyl Siding Repair Wood Siding Installation Wood Siding Repair Gutters Gutter Installation Gutter Repair Fascia Installation Fascia Repair Soffit Installation Soffit Repair Exterior Exterior Painting Fence Installation Fence Repair
Areas Service Areas
Shelby County, TN All of Shelby County, TN Memphis, TN
Memphis services Storm Damage Repair Class 4 Impact Resistant Architectural Shingle Roofing Roof Insurance Claims Soffit Installation
Collierville, TN
Collierville services Shingle Roofing Wind Damage Repair Flat Roof Repair Gutter Installation Fascia Repair
Bartlett, TN
Bartlett services Class 3 Impact Resistant Hail Damage Repair Townhome Roof Repair Gutter Repair Soffit Repair
Lakeland, TN Arlington, TN Millington, TN Cordova, TN Eads, TN Ellendale, TN Brunswick, TN Capleville, TN Hickory Hill, TN Raleigh, TN Frayser, TN East Memphis, TN Southwind, TN Forest Hill, TN Riverdale, TN
Fayette County, TN All of Fayette County, TN Piperton, TN Oakland, TN Hickory Withe, TN
DeSoto County, MS All of DeSoto County, MS Southaven, MS Olive Branch, MS Horn Lake, MS Hernando, MS Nesbit, MS
Tipton County, TN All of Tipton County, TN Atoka, TN Brighton, TN Munford, TN Covington, TN Tipton, TN
Crittenden County, AR All of Crittenden County, AR West Memphis, AR Marion, AR
Gallery Blog Careers Contact
Call · (901) 922-9450
Skip to content

Eaves

Soffit repair for Bartlett eaves

Soffit is the underside of the eave, and on an older Bartlett house it is often where water and animals first find a way in. A soft panel, a gap at a corner, or a brown stain under the gutter is usually a small repair when somebody catches it before the wood behind it goes.

How an older eave starts to open up

Bartlett's established streets carry a lot of soffit that has spent years under the same gutters and the same trees.

Most soffit damage starts with water from above. When a gutter overflows or a drip edge is missing, rain runs over the fascia and wicks into the soffit board tucked behind it. Plywood soffit drinks that water in at its edges, the layers start to separate, and the panel sags between its supports. You notice it as a belly in the eave or a brown ring on the paint.

Humidity keeps that damage going. A soffit board soaked in a summer storm does not dry quickly in air this heavy, and the paint that once sealed it starts to blister and peel along the joints. Once the paint lets go, each rain soaks a little deeper, and the board that was only stained last year is soft this year.

Trees bring the animals. Branches that reach the roofline give squirrels a road straight to the eave, and a soft corner or a panel that has dropped half an inch is all they need to chew into the attic. Wasps and birds use the same openings. The gap is often small enough that nobody spots it until something is heard moving in the ceiling.

Soffit Repair is one of the 43 things we do across the metro. The soffit repair page covers the work itself, and if something is wrong at your Bartlett property you can send over the details or call (901) 922-9450.

Opening the eave and closing it back up

The damage gets traced to its source

Before a panel comes down, Jonathan looks above it. A stain under a gutter corner points to an overflow or a leaking end cap, and a soft run under a valley can mean water coming off the roof itself. Fixing the soffit while leaving that source alone means doing the job twice, so the cause gets named in the photographs.

Bad sections come out back to solid framing

The damaged panel gets cut out to the nearest sound support, and the nailers behind it get checked while they are exposed. Rotted framing is replaced or reinforced so the new panel has something firm to fasten to. New soffit fastened to soft framing just moves the sag a few feet along the eave.

New sheathing is fit to the corner

Corners are where soffit usually fails, because two runs meet there and water collects at the joint. New sheathing is cut to sit tight against the fascia and the wall and fastened so it lies flush with the old panel beside it. Once it is up, it gets primed and painted to match the trim, cut edges included.

Vents stay open and gaps get closed

If the section had vents, the new piece gets them back, screened so wasps and birds cannot move in. Every seam and the gap at the wall gets sealed. When it is done, the only openings left in that eave are the vents that belong there.

What turns up once the panel is down

A soffit repair is a chance to see behind the trim, and that view usually explains why the panel failed.

Fitting a new soffit panel under the eave of a home in Memphis, Tennessee

Nests and chewed framing

Where squirrels have been coming and going, we tend to find nesting material packed into the eave and gnawed edges on the boards around the hole. That debris holds moisture against the wood. It all comes out, and if the chewing reached a rafter tail, you see a photograph of it before anything is decided.

Rafter tails gone soft

The rafter tails sit right behind the fascia, and the water that ruined the soffit has often reached them as well. A tail that has softened at its end will not hold new trim securely. Shallow damage can be cut back and reinforced, and anything deeper gets a longer conversation with pictures in hand.

Fascia that failed first

Plenty of sagging soffit is really hanging from fascia that has rotted along its bottom edge. With the eave open, that board is easy to probe from behind. If it is soft, replacing the soffit alone ties the new panel to wood that is still failing, so the board goes on the written price too.

A gap sealed with something still inside

Closing an eave over a live nest traps the animal in the attic, and a trapped squirrel chews its way out again, usually right beside the new panel. So the order matters: we look and listen for activity first, and a gap with fresh signs stays open until whoever handles the removal confirms the space is empty. Only then does it get closed.

Vented panel, solid panel, and an older run

Soffit comes in two basic kinds. Vented panel carries perforations or a screened slot so air can reach the attic at the eave, and solid panel closes it off. A repair puts back whatever that stretch had, so a vented run never ends up with a blind patch in the middle. Solid belongs where nothing sits behind the eave that needs air, such as over some porch ceilings.

Vinyl and aluminum are the hard ones to match. Panel from years back came in widths, profiles and colors that may not be stocked anymore, and an older run has faded in the sun besides. Where possible, Jonathan holds a sample against the existing panel before anything gets ordered. If nothing lines up, you choose between a visible patch on a side few people see or new panel across that whole face so it reads as one surface.

Painted wood is simpler. The new sheathing gets primed and painted to the trim color after it is fastened, and the seam between old and new lands on a support so it lies flat. Either way, the free look comes with photographs and a written price before anything is cut, and the company is licensed, bonded and insured with an A+ from the BBB.

We wrote this one up at more length on the blog: How Animals Get Into Your Eave Through Old Soffit.

Where this work happens

Bartlett is one of the towns we are in regularly rather than occasionally, and that is the difference between a day or two and the back half of next month. More of what we do in town is on the Bartlett page.

Questions from Bartlett

What causes soffit to sag?

Water, nearly always. An overflowing gutter or a missing drip edge lets rain soak the soffit board at its edge, plywood separates as it swells, and the panel drops between its supports. Loose or rotted nailers behind it make it worse. Finding where the water came from is part of every repair.

Should the new soffit be vented or solid?

Usually whatever was there before. If that run had vents, the new panel gets them back, screened, so the eave keeps drawing air the way it did. Solid panel suits spots with no attic space behind the eave, like some porch ceilings. Jonathan checks from the attic side before anything gets decided.

Squirrels are getting into my eave. Can you stop them?

We can close the opening once the animals are out. Nest material gets cleared, chewed wood gets replaced, and the new panel is fit tight with screened vents. If branches reach the roof, trimming them back helps as well, since a squirrel with no road to the eave tends to move on.

Is a brown stain on my soffit a roof leak?

Sometimes, though more often it is the gutter. Stains right under a corner or an outlet point to overflow or a leaking end cap. A stain under a valley or where the roof meets a wall can mean water coming off the roof. Jonathan checks both from the ladder and shows you what he finds.

Do you check the fascia when you repair soffit?

Every time. Soffit and fascia meet at the eave, and the same water usually reaches both. With the panel down, the back of the fascia and the rafter tails are easy to probe. If anything there is soft, it gets photographed and priced before the eave is closed back up.

Will the repair match the rest of my soffit?

Painted wood blends in well once the new piece has its primer and finish coat. Faded vinyl or aluminum is tougher, since older panel styles drop out of stock. Jonathan compares a sample to your eave first, and if nothing comes close, you hear that and see the options before any work starts.

Also handled around Bartlett

The rest of what we handle on this side of the metro, in case the roof is not the only thing on your mind.

What customers say

Jonathan was extremely professional, dependable, and efficient. I needed a new roof, he came out to my property within 24hrs of first contact, walked my roof, and gave very fair pricing.

I can’t say enough good things about All Done Roofing. Jonathan has been professional, personal, and caring to my projects that needed to be addressed at my residence.

A gap at the eave is easiest to close while it is small

Send a photo of the sagging panel or the spot where something has been getting in. Jonathan will come out for a free look at the eave.

Open8:00 AM to 8:00 PM, seven days
AreaGermantown, TN and the Memphis metro

The number rings Jonathan. Miss him and expect a call back the same day.

See recent work